IPS-3082GC-24V is managed redundant ring Ethernet switch with 8×10/100Base-T(X) ports with PoE (P.S.E.) function and 2xGigabit combo ports. With completely support of Ethernet redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-3082GC-24V also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-3082GC-24V supports wide range 24~36VDC power inputs and generates 48VDC P.S.E. power output per port. Each IPS-3082GC-24V switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-3082GC-24V support new DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electronic voltage, current and temperature. All function of IPS-3082GC-24V can be managed centralized by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application with PoE function.

Physical PortsTechnologyLED IndicatorsPowerPhysical CharacteristicsEnvironmentalRegulatory ApprovalsFeatures

10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX: 8

Gigabit Combo Ports with 10/100/1000Base-T(X) and 100/1000Base-X SFP port: 2

Ethernet Standards:
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3af PoE specification (up to 15.4 Watts per port for P.S.E.)

MAC Table: 8192 MAC addresses


Priority Queues: 4

Switch Properties:
Switching latency : 7 μs
Switching bandwidth : 5.6Gbps
Max. Number of Available VLANs : 4096
IGMP multicast groups : 1024
Port rate limiting : User Define

Security Feature:
Enable/disable ports MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
Port configuration, status, statistics, monitoring, security
SNMP v1/v2c/v3 encrypted authentication and access security

Software Features:
Redundant Ring (O-Ring) with recovery time less than 10ms over 250
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
IGMP Snooping for multicast filtering
MVR (Multicast VLAN Registration) support

Network Redundancy:
Fast Recovery Mode

Warning / Monitoring System:
Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Fast Recovery Mode
Event selection support

DDM Function:
Voltage / Current / Temperature

RS-232 Serial Console Port
RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1

Power Indicator:
Green : Power LED x 3, Green : PoE LED x 8

R.M. Indicator:
Green : Indicates that the system is operating in O-Ring Master mode

Fault Indicator:
Amber : Indicates power failure occurred

O-Ring Indicator:
Green : Indicates that the system is operating in O-Ring mode

10/100Base-T(X) RJ45 Port Indicator:
Green for port Link/Act. Amber for Duplex/Collision

10/100/1000Base-T(X) RJ45 Port Indicator:
Green for port Link/Act. Amber for 100Mbps indicator

100/1000Base-X / Fiber Port Indicator:
Green for port Link/Act.

Redundant Input Power:
Dual 12~48 VDC power input at 6-pin terminal block

Power Consumption (Typ.):
11.52 Watts (Power consumption of P.S.E. not included)

Overload Current Protection: Present

Reverse Polarity Protection: NOT Present


Dimensions (W x D x H):
74.3(W)x109.2(D)x153.6(H) mm ( 2.93 x 4.3 x 6.05 inch.)

Weight (g):

Storage Temperature:
-40 to 85°C (-40 to 185°F)

Operating Temperature:
-40 to 70°C (-40 to 158°F)

Operating Humidity:
5% to 95% Non-condensing

FCC Part 15, CISPR (EN55022) class A

EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

Shock: IEC60068-2-27

Free Fall: IEC60068-2-32

Vibration: IEC60068-2-6

Safety: EN60950-1

Warranty: 5 years

  • Fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
  • Open-Ring supports other vendor’s ring technology in open architecture
  • Supports IEEE 802.3af 15.4Watts compliant PoE
  • STP/RSTP/MSTP supported
  • Provides PoE power on delay function, users can define delay time for PoE power supply
  • Supports PTP Client (Precision Time Protocol) clock synchronization
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Port Trunking for easy of bandwidth management
  • RMON for traffic monitoring
  • SNMP v1/v2c/v3 support for secured network management
  • Supports DDM (Digital Diagnostic Monitoring) function
  • Event notification through Syslog, Email, SNMP trap, and Relay Output
  • Windows utility (Open-Vision) support centralized management and configurable by Web-based interface,Telnet, and Console (CLI)
  • Supports two Gigabit combo ports
  • DIN-Rail and wall mounting enabled
  • Rigid IP-30 housing design
  • Supports LLDP Protocol