Form FactorFeaturesProcessor SystemExpansion SlotMemoryGraphicsEthernetSATARear I/OInternal ConnectorWatchdog TimerPower RequirementsEnvironment
- Intel® Dual-Core Atom™ CedarViewProcessor D2550/N2600/N2800
- Intel® NM10 Express Chipset
- Integrated Intel® PowerVR SGX545, DirectX 9.0, Pixel Shader 3.0
- Supports DDR3 1066MHz, 2 x SO-DIMM, up to 4GB system memory
- 1 x COM (RS-232/422/485), 4 x COM (RS-232)
- 1 x D-Sub, 1 x HDMI, 1 x Dual Channel 24-bit LVDS
- 7 x USB 2.0, 2 x SATA2
- 1 x PCI, 1 x mini-PCIe
- Gigabit LAN : 2 x Realtek RTL8111E-VL
- CPU: Intel® new Atom™ Baytrail-E3800 Series
- Supports Hyper-Threading Technology
- Default E3826 Dual core processor
- Core Number: (By CPU, Max 4)
- L3 Cache: (By CPU)
- Chipset: (By CPU)
- BIOS: UEFI
- PCI: O
- Mini-PCIe: 1 (Half Size) + 1 (Full Size) shared with mSATA
- mSATA: 1 (Full Size) shared with SATA2
- PCIe: 0
- CFast Card Socket: 0
- Technology : Single Channel DDR3 1333 MHz SDRAM
- Max.: 8 GB
- Socket : 1 x SO-DIMM
- Controller : Intel® Gen7 Intel® Graphics DX 11, OGL3.2
- VRAM: Shared Memory
- VGA: Supports max resolution 1920 x 1200
- LVDS: Dual Channel 24-bit, max resolution 1920 x 1200@60Hz
- HDMI: – Supports HDMI 1.4a, max resolution 1920 x 1200
- DVI: No
- DisplayPort: No
- MultiDisplay: Yes (Dual Display)
- Ethernet: 10/100/1000 Mbps
- Controller: GbE LAN: Realtek RTL8111G-CG
- Connector: RJ-45 x 2
- Max Data Transfer Rate : SATA3 (3.0Gb/s)
- VGA: 1
- DVI: 0
- HDMI: 1
- DisplayPort: 0
- Ethernet: 2
- USB: 2 (USB 3.0,)
- Audio: 1 ( Line-out)
- Serial: 0
- eSATA: 0
- PS2: 0
- USB: 6 (3 x 2.54 pitch header USB 2.0 compliant)
- LVDS/inverter: 1/1
- VGA: 0
- Serial: 4 x RS232
- SATA: 2 x SATA2 (3.0Gb/s)
- mPCIe: 1
- Parallel: 0
- mSATA: 1 (Shared)
- IrDA: 0
- GPIO 8-bit: 4 x GPI + 4 x GPO
- SATA PWR Output Con: 1
- Speaker Header: 1
- Output: From Super I/O to drag RESETCON#
- Interval: 256 segments, 0,1,2…255sec/min
- Input PWR: 9-36V DC-In using 4-pin ATX PWR Con
- Power On: AT/ATX Supported
- – AT : Directly PWR on as power input ready
- – ATX : Press button to PWR on after power input ready
- Temperature: – 0ºC – 60ºC