03-5633 4921



SPL-101GT series is a high power PoE Splitter for use in Power over Ethernet systems. With Ethernet Input (data + power) port and Output (data only) port, SPL-101GT may split power from existing LAN cable and convert up to 24VDC/1.125A or 12VDC/1.6A(SPL-101GT-12V) for power hungry applications such as Wireless APs, Security cameras and IP Phones. The internal current limit, short-circuit and overload protection are implemented for use as a DC power supply.

Oring Model Name & Physical PortsOperating VoltageLED IndicatorsPhysical CharacteristicsEnvironmentalRegulatory ApprovalsFeatures

Oring Model Name:

RJ-45 Ethernet Port with P.S.E. Input: 1

RJ-45 Ethernet Port Output: 1

Power Output Connector: 4-pin terminal block

Input Voltage:
36 ~ 57 VDC

Output Voltage:
SPL-101GT : 24V @ 1.125A max
SPL-101GT-12V : 12V @ 1.6A max

Power Indicator:
PWR / Ready: 1 x LED
Blue On: Power is on and functioning Normally

Short Circuit Protection:

Over Load Protection:

Isolation Protection:


Dimensions (W x D x H):
26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)

250 g

Storage Temperature:
-40 to 80°C (-40 to 176°F)

Operating Temperature:
-20 to 70°C (-4 to 158°F)

Operating Humidity:
5% to 95% Non-condensing

FCC Part 15, CISPR (EN55022) class B

EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

Safety: EN60950-1

Warranty: 5 years

  • Fully compliant with IEEE802.3at standard
  • Supports 10/100/1000Base-T(X) for PoE In and Data Out
  • Power Isolation and Short Circuit Protection for Power Output
  • Auto protection for Over Voltage Power Input
  • Supports Power Outputs up to 27Watts Max
  • IP-30 Rugged Case Design
  • DIN-Rail and Wall Mount Design