
ORing Switch Model:
TPS-1080-M12
TPS-1080-M12-24V
10/100 Base-T(X) Ports in M12 Auto MDI/MDIX with P.S.E.:
8 x M12 connector (4-pin D-coding)
Ethernet Standards:
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3x for Flow control
IEEE 802.3at compliant PoE specification (Maximum 30Watts per port)
MAC Table: 8K MAC addresses
Processing: Store-and-Forward
Power Indicator: Green : Power LED x 3
Fault Indicator: Amber : Indicate PWR1 or PWR2 failure
10/100Base-T(X) M12 port indicator and PoE indicator:
Top for port Link/Act indicator. Green for 100Mbps link, Amber for 10 Mbps link
Middle Amber for Duplex / Collision indicator
Bottom blue for PoE Injected indicator
Relay:
Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
TPS-1080-M12
Redundant Input Power: Dual 48VDC on 5-pin M23 connector
Power Consumption (Typ.): 2.5 Watts (power consumption of P.S.E. is not included)
PoE Output Power: 240 Watts
Overload Current Protection: Present
Reverse Polarity Protection: Present on terminal block
TPS-1080-M12-24V
Redundant Input Power: Dual 48VDC on 5-pin M23 connector
Power Consumption (Typ.): 7.5 Watts (power consumption of P.S.E. is not included)
PoE Output Power: 60 Watts (12~24VDC) / 120 Watts (24~57VDC)
Overload Current Protection: Present
Reverse Polarity Protection: Present on terminal block
Enclosure: IP-40
Dimensions (W x D x H): 125 (W) x 65 (D) x 196 (H) mm
Weight (g):
TPS-1080-M12: 996g
TPS-1080-M12-24V: 1054g
Storage Temperature: -40 to 85°C (-40 to 185°F)
Operating Temperature: -40 to 70°C (-40 to 158°F)
Operating Humidity: 5% to 95% Non-condensing
EMI:
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS:
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Warranty: 5 years
- Leading EN50155-compliant Ethernet switch for rolling stock application
- Provide 8×10/100Base-T(X) PoE (P.S.E.) ports
- Supports IEEE 802.3at compliant PoE with maximum 30Watts per port
- Support dual power inputs for power redundancy
- Support auto-negotiation and auto-MDI/MDI-X
- Support store and forward transmission
- Support flow control
- M12 connectors to guarantee reliable operation against environmental disturbances
- Rigid IP-40 housing design
- Wall mounting enabled